CAD to BIM with AI

CAD to BIM: How a DWG Becomes a Model, and Where AI Helps

A DWG holds lines and text, and a BIM model holds walls, doors, and ducts with properties, so moving from one to the other is modeling work, not a file conversion. Nomic does not skip that step. It reads the DWG for the data your modeler needs, draws changes in files that line up with the model, and, with the Nomic add-in for Revit, makes edits in the model itself after your approval.

Last reviewed: November 2026

You send

  • The DWG and any xrefs
  • The model grid and level origin, or the model itself
  • Markups or comments the changes answer
  • Which elements the model needs first

Nomic hands back

  • An Excel file of counts, lengths, and areas read from the DWG
  • A DWG drawn on the model grid, ready to link into Revit
  • A change list with sizes and grid locations
  • Edits in the open Revit model, through the add-in and with your approval
SUPPLY DUCT 24x14LEVEL 3 | SYSTEM SA-12,400 CFM | 0.08" W.C./100 FT1A3D BUILDING MODELSCALE: NONE1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTRIVERSIDE HOTELSCALENONEDATE07/26/2026KEY PLANSHEET TITLE3D BUILDING MODELSHEET NUMBERM-001

On the sheet

3D Building Model, annotated

A building model where each element carries its level, system, and size, so sheets and schedules read from it.

  1. 1Floor slabs with level datums
  2. 2Columns on the structural grid
  3. 3Selected level and its properties
  4. 4Modeled element with its system data

The problem

A DWG has lines, and a model needs objects

On a CAD drawing, a door is a block and a tag. In a BIM model, a door is an object with a width, a fire rating, and a host wall, and the schedule reads from it. Moving from CAD to BIM means deciding, line by line, what each piece of linework is, then building that object in the model. Importing the file does not do that. It brings in lines the model cannot schedule or coordinate.

Renovations arrive as DWG or PDF, the owner wants a model, and a modeler spends days tracing walls while the design team waits. The tracing is repetitive. The decisions inside it, which line is a bearing wall and which is furring, are where the modeler judgment matters.

01 / Read

The data in the DWG, pulled out for the modeler

Nomic reads the DWG and its xrefs and extracts what a modeler builds from: block counts by name and layer, room labels and tag attributes, polyline lengths, and hatch areas. The result is an Excel file where every row points back to the layer and location it came from, so the modeler checks a list instead of counting symbols.

  • Door, window, and fixture counts by block and layer
  • Room labels and tag attributes read into columns
  • Wall lengths and areas totaled by layer
02 / Hand off

Changes drawn so they line up with the model

When the work is a set of changes to an existing model rather than a first build, Nomic drafts them in CAD on the model grid and level origin, so the DWG lines up when it is linked into Revit. It writes a change list in Excel with sizes and grid locations, and checks the drawing against the comments it came from. The modeler follows the list instead of reading markups.

  • DWG drawn on the model grid and level origin
  • Change list with sizes and grid locations
  • Drawing checked against the original comments
03 / Build

Edits in the model itself, with the add-in

With the Nomic add-in for Revit, Nomic works in the open model. It creates and edits walls, floors, framing, ducts, pipes, conduit, rooms, views, and sheets, and it asks before each change. The modeling decisions stay with your team. Nomic does the placing you ask for, then captures an image of the view and checks it.

  • Elements created and edited in the open Revit model
  • Every change approved by you, and undoable in one step
  • Revit 2022 to 2027 on Windows, through the add-in

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • The DWG and its xrefs
  • The model grid and level origin
  • The comments the changes answer
  • An image of the affected view after each change in Revit

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Not in one step. A DWG holds lines and text, and a model holds objects with properties, so someone models it. Nomic reads the DWG for the data the modeler needs, drafts changes in files that line up with the model, and with the Nomic add-in for Revit can create and edit elements in the open model after your approval.

A linked or imported DWG gives you lines to trace over. The model still cannot schedule, tag, or coordinate those lines as elements until someone builds walls, doors, and ducts from them.

Block counts, attributes, polyline lengths, and hatch areas, by layer and sheet, returned as an Excel file with every row traced back to the drawing.

Lines, polylines, text, and blocks are read. AutoCAD MEP and AutoCAD Architecture objects in an attached file, such as ducts and walls, are not.

The Revit add-in is part of the Enterprise plan and is in enterprise preview. Your Nomic account team provides the installer and turns it on for your organization.
CAD to BIM: Moving a DWG Into a Model | Nomic