AI for DWG data extraction

AI DWG Data Extraction: Blocks, Attributes, and Quantities to Excel

A DWG holds more data than anyone reads: every fixture block, every tag attribute, every polyline length and hatch area. Getting it into a spreadsheet usually means a data extraction wizard, a cleanup pass, and a second person checking the totals. Nomic opens the DWG, extracts the blocks, attributes, lengths, and areas you ask for, and returns an Excel file where every row points back to the layer, layout, and location it came from.

Last reviewed: November 2026

You send

  • DWG files with their xrefs
  • A plain language description of what to extract
  • Your estimate, BOQ, or takeoff template in Excel
  • The previous revision, if you want changes listed

Nomic hands back

  • An Excel file with one traced row per extracted item
  • Totals grouped by type, level, room, or cost code
  • A highlighted DWG or PDF showing what was counted
  • A list of items that could not be classified
DOOR SCHEDULEMARKWIDTHHEIGHTTYPEMATLFRAMERATINGHDWREMARKS2013'-0"7'-0"BALHM1ADA PUSH PLATE2023'-6"7'-0"AHMHM20 MIN1CLOSER, SMOKE GASKET2036'-0"7'-0"BWDAL1204A3'-0"7'-0"AALHM90 MIN22053'-0"7'-0"AWDAL22063'-6"7'-0"FWDAL62073'-6"7'-0"AHMHM20 MIN6CLOSER, SMOKE GASKET208A3'-0"7'-0"AALHM42093'-0"7'-0"FHMAL62103'-6"7'-0"FWDHM12113'-0"7'-0"FHMHM90 MIN1212A3'-0"7'-0"FHMHM20 MIN3CLOSER, SMOKE GASKET2133'-0"7'-0"BWDHM4ADA PUSH PLATE2146'-0"7'-0"BWDAL32153'-6"7'-0"FALHM2216A6'-0"7'-0"AHMAL31ADOOR SCHEDULESCALE: NONE1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTWESTFIELD LABSSCALENONEDATE04/14/2026KEY PLANSHEET TITLEDOOR SCHEDULESHEET NUMBERA-601

On the sheet

Door Schedule, annotated

A door schedule keyed to the plan, with sizes, materials, fire ratings, and hardware sets.

  1. 1Door mark keyed to the floor plan
  2. 2Fire rating for doors in rated walls
  3. 3Remarks with special requirements
  4. 4Revised row, clouded for the reissue

The problem

The data is in the drawing, but not in a form anyone can use

AutoCAD's data extraction works when the drawing is clean: consistent block names, attributes filled in, everything on the right layer. Real project drawings are rarely that clean. The same light fixture is three block names from three consultants, some tags are plain text instead of attributes, xrefs hold half the content, and exploded blocks no longer count as blocks at all.

So the takeoff gets done by hand anyway, by someone counting symbols on a PDF or exporting a table and fixing it row by row. When the drawing is revised, the count is redone from scratch, and there is no record of which symbols were counted and which were missed.

01 / Extract

Blocks, attributes, and geometry read from the DWG

Tell Nomic what you need in plain language: every door tag with its attributes, every light fixture by type and room, pipe length by size, or wall area by finish. Nomic reads the DWG and its xrefs, groups block names that mean the same thing, and picks up tags written as plain text as well as attributes.

  • Block counts by name, layer, layout, and room
  • Attribute values read into columns, including blank ones
  • Polyline lengths and hatch areas totaled by layer
02 / Trace

Every row traced back to the drawing

Each row in the spreadsheet carries the file, layout, layer, and coordinates it came from, and Nomic can save a marked-up copy of the drawing with every counted item highlighted. Anyone checking the takeoff sees what was counted and what was not, without redoing it.

  • File, layout, layer, and coordinates on every row
  • A highlighted DWG or PDF showing what was counted
  • Items Nomic could not classify listed separately
03 / Reconcile

Counts compared with the schedule and the last revision

Nomic compares what it extracted with the schedules on the drawings and with the previous revision. Fixture types on the plans with no schedule row, schedule rows with no fixtures, and counts that changed since the last issue are listed, so the takeoff and the drawings agree before anyone prices them.

  • Extracted types compared with the schedule on the drawings
  • Changes in count since the previous revision listed
  • Quantities grouped the way your estimate or BOQ needs them

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • The block and layer names in your CAD standards
  • The schedules on the drawings
  • The previous issued revision
  • Your estimate or BOQ structure, such as CSI MasterFormat or NRM 2

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Yes. Nomic opens the DWG and its xrefs and extracts block counts, attribute values, text, polyline lengths, and hatch areas. It returns an Excel file where every row points back to the file, layout, layer, and location it came from.

AutoCAD data extraction reads clean attributes from consistent blocks. Nomic also groups block names that mean the same thing, reads tags written as plain text, counts inside xrefs, and lists exploded or unclassified items instead of skipping them. You describe what you need in plain language instead of building an extraction template.

Nomic extracts the counts, lengths, and areas and groups them in the structure your estimate or BOQ uses. Your estimator applies the measurement rules, prices, and allowances, and every quantity can be traced back to the drawing.

Yes. Nomic can fill blank attributes, retag blocks, or draw a schedule table on the sheet from the extracted data, and save a new DWG with the changes clouded. Your team reviews the changes before the drawing is issued.

Both. With the Nomic add-ins for AutoCAD and Revit, the Nomic agent works in the drawing or model your team has open, with your approval before each change. Nomic can also work on its own computer and read or save DWG files outside either program.
AI DWG Data Extraction: Blocks and Quantities to Excel | Nomic