CAD to Revit with AI

CAD to Revit: Link, Import, or Rebuild a DWG in Your Model

A DWG gets into Revit three ways: linked as a reference, imported into the model, or rebuilt as model elements. Linking keeps the model clean, importing clutters it, and rebuilding is the work people mean by convert. Nomic helps on each side of that choice: it draws DWGs on the model grid so they line up when linked, and with the add-in it makes the model edits itself after your approval.

Last reviewed: November 2026

You send

  • The model grid and level origin
  • Markups or review comments the changes answer
  • The DWG you need to bring into Revit, if it already exists
  • The Revit model, if you want the edits made in it

Nomic hands back

  • A DWG drawn on the model grid, meant to be linked
  • A change list in Excel with sizes and grid locations
  • Edits made in the open Revit model, with your approval
  • A drawing checked against the comments it answers
1234567ABCW24x55W24x55W24x55W16x2618K5 @ 5'-0" O.C.TOP OF STEEL EL. 128'-6" | 3" COMPOSITE DECK + 3-1/4" LW CONC.27'-3"27'-0"27'-3"27'-3"27'-0"27'-3"94'-8"1AFRAMING PLANSCALE: 1/8" = 1'-0"N1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTHARBOR POINT OFFICESSCALE1/8" = 1'-0"DATE03/06/2026KEY PLANSHEET TITLEFRAMING PLANSHEET NUMBERS-201

On the sheet

Framing Plan, annotated

A structural framing plan with columns on the grid, girders, infill beams, and the lateral system.

  1. 1Steel column at each grid intersection
  2. 2Girder on the grid line, sized on plan
  3. 3Joists with spacing and span arrow
  4. 4Moment connection in the lateral frame

The problem

The import is quick, and the model pays for it later

Revit offers two ways to bring in a DWG, Link CAD and Import CAD, and the choice matters. A linked DWG stays a separate file that updates when the consultant reissues it. An imported DWG is embedded in the model, adds weight to the file, and carries its layers into the project. Exploding an import makes it worse, because the lines turn into Revit lines, text styles, and line styles that clutter the project and cannot be traced back.

Alignment is the other trap. A DWG drawn on a different origin or in different units lands in the wrong place or at the wrong size, and the error shows up when a wall built over the linework misses its grid. Each side assumes the other side checked.

01 / Link

DWGs that line up when they are linked

When Nomic drafts changes for a Revit team, it draws the DWG in CAD on the model grid and level origin, so the file lines up when your modeler links it. The changes are clouded and tagged, so the modeler sees what moved at a glance.

  • Drawn on the model grid and level origin
  • Changes clouded and tagged on the drawing
  • Meant to be linked, so the model stays clean
02 / List

A change list the modeler can follow

Alongside the DWG, Nomic writes a change list in Excel with every edit, its size, and its grid location, and checks the drawing against the comments it answers. The model update becomes a matter of working down a list instead of reading redlines.

  • Every edit with its size and grid location
  • An Excel file next to the DWG
  • Drawing checked against the original comments
03 / Edit

Or have Nomic make the edit in the model

With the Nomic add-in for Revit, your team can ask for the change in the model itself. Nomic reads the open model, asks before it changes anything, and makes each change as a single Revit transaction with your families and types. Afterward it captures an image of the view and checks it.

  • Changes made with your families and types
  • Each approved change is one Revit transaction
  • An image of the view checked after the change

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • The model grid and level origin
  • The comments or markups behind each change
  • Your families and types in the Revit model
  • An image of the affected view after each change

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Use Link CAD for a reference that updates when the DWG is reissued, or Import CAD to embed it in the model. Linking keeps the model lighter and is the usual choice for consultant drawings.

Not as a one-step conversion. Rebuilding a DWG as walls, doors, and ducts is modeling work. Nomic can draw DWGs that line up with the model, write a change list, and, with the Nomic add-in for Revit, create and edit elements in the open model after your approval.

Usually a different origin or different units. Revit offers positioning options such as origin to origin, center to center, and shared coordinates. Nomic draws on the model grid and level origin so the file lines up when it is linked.

The model grid, the level origin, and the markups or comments the changes answer. Nomic draws on that grid and checks the DWG against the comments.

The Revit add-in is part of the Enterprise plan and is in enterprise preview. Your Nomic account team provides the installer and turns it on for your organization.
CAD to Revit: DWG Link, Import, and Rebuild | Nomic