Revit to CAD with AI

Revit to CAD: Export DWG Backgrounds That Consultants Can Use

Exporting a Revit view to DWG is simple. The DWG a consultant can use takes four choices: the layer mapping, the units, the coordinates, and whether views come out as one file or as xrefs. The Nomic add-in exports views and sheets from Revit to PDF and the model to IFC. For DWG, export from Revit with your layer mapping, and Nomic drafts on the result.

Last reviewed: November 2026

You send

  • The DWG exports from Revit, with the layer mapping used
  • Your CAD standards and title block
  • The reissued export each time the model changes
  • The Revit model open with the add-in, if you want PDF or IFC from it

Nomic hands back

  • A list of layers, blocks, and xrefs that do not match your standard
  • Consultant sheets drafted on the exported DWGs
  • Revised sheets with the changes clouded after a reissue
  • PDF and IFC exported from the open model, through the add-in
1234567ABCOFFICE401OPEN OFFICE402OPEN OFFICE403OFFICE404OFFICE405CONFERENCE406OPEN OFFICE407CONFERENCE408CONFERENCE409STAIRS2401402403404405406P127'-3"27'-0"27'-3"27'-3"27'-0"27'-3"94'-8"1AFLOOR PLANSCALE: 1/8" = 1'-0"N1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTHARBOR POINT OFFICESSCALE1/8" = 1'-0"DATE03/02/2026KEY PLANSHEET TITLEFLOOR PLANSHEET NUMBERA-101

On the sheet

Floor Plan, annotated

An architectural floor plan with walls, doors, room tags, and the column grid every other discipline draws on.

  1. 1Exterior wall with window openings
  2. 2Door, swing, and door tag
  3. 3Room name and number
  4. 4Partition type tag

The problem

A bad export costs every consultant downstream

Revit maps model categories to CAD layers through an export setup. Use the wrong mapping and the consultant gets layers that do not match their standard, so every sheet starts with a cleanup. Export in the wrong units, or away from the project shared coordinates, and the backgrounds land in the wrong place in the consultant drawings.

The export also repeats at every reissue, to a growing list of recipients. A setting someone changed once ships quietly to all of them until a consultant calls to ask why the layers changed.

01 / Export

The settings that decide whether the DWG is usable

Four choices decide it: a layer mapping the recipients can work with, the units, the coordinate system, and views as separate files or as external references. Agree them once, write them down, and use the same export setup every time. Attach the exported DWG to Nomic and it checks the file against your CAD standards and lists the layers, blocks, and xrefs that do not match.

  • Layer mapping agreed with the receiving teams
  • Units and coordinates set once and reused
  • Exported DWGs checked against your CAD standards
02 / Draft

Consultant sheets drafted on the exported DWGs

Attach the exported DWG and Nomic drafts on it: a power plan, a ceiling plan, a sprinkler layout. The export becomes an xref and stays light, and your systems go on your layers in your title block. When the architect reissues, Nomic compares the new export with the one you drafted on and redraws what moved.

  • Export attached as an xref, kept light
  • Systems on your layers and in your title block
  • Reissued exports compared and the changes clouded
03 / Share

PDF and IFC straight from the open model

When a recipient does not need CAD, the Nomic add-in exports views and sheets from the open Revit model to PDF, and the model to IFC, so the DWG round trip is skipped where it adds nothing. The add-in runs in Revit 2022 to 2027 on Windows.

  • Views and sheets exported to PDF from the open model
  • The model exported to IFC for recipients who work in a model
  • DWG exported from Revit with your layer mapping where CAD is needed

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • Your CAD standards and layer naming
  • The exported DWG, new against old
  • The title block and xrefs on each exported file

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

In Revit, export the views or sheets you need to DWG using an export setup that sets the layer mapping, units, and coordinates. Use the same setup every time so consultants get consistent layers.

The Nomic add-in for Revit exports views and sheets to PDF and the model to IFC. For DWG, export from Revit with your layer mapping and attach the result to Nomic to draft on it.

Yes. Nomic can check a DWG against your CAD standards and list the layers, blocks, and xrefs that do not match, so the export is fixed before it goes to consultants.

Nomic redraws PDFs as to-scale, layered DWG backgrounds and flags anything it could not read. A direct export from Revit is more accurate when you can get one.

The Revit add-in is part of the Enterprise plan and is in enterprise preview. Your Nomic account team provides the installer and turns it on for your organization.
Revit to CAD: Export DWG Backgrounds, Then Draft | Nomic