Revit to IFC with AI

Revit to IFC with AI: Export the Model, Then Ask It Questions

An IFC export is how a Revit model reaches people who do not have Revit: the estimator, the owner, the reviewer, the consultant on another platform. What they get depends on the export setup, and problems show up only when someone opens the file. Nomic exports the model to IFC with the add-in, then reads the IFC the way the recipient will and checks what it actually carries.

Last reviewed: November 2026

You send

  • The Revit model open with the Nomic add-in connected
  • The IFC version and property sets your recipients need
  • The checks that matter for the handover or review

Nomic hands back

  • An IFC file exported from the open model
  • A list of missing or inconsistent properties
  • Answers, schedules, and quantities from the IFC, with citations
  • Excel exports of the check and schedule results
SUPPLY DUCT 24x14LEVEL 3 | SYSTEM SA-12,400 CFM | 0.08" W.C./100 FT1A3D BUILDING MODELSCALE: NONE1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTNORTHGATE MEDICALSCALENONEDATE02/11/2026KEY PLANSHEET TITLE3D BUILDING MODELSHEET NUMBERM-001

On the sheet

3D Building Model, annotated

A building model where each element carries its level, system, and size, so sheets and schedules read from it.

  1. 1Floor slabs with level datums
  2. 2Columns on the structural grid
  3. 3Selected level and its properties
  4. 4Modeled element with its system data

The problem

The IFC is where missing data finally shows up

The export setup decides what leaves the model: the IFC version, which property sets go out, whether base quantities are included. A door with a fire rating in Revit can arrive in the IFC with no rating, and a room with an area can arrive as a space with none. Nobody sees that on the Revit side, because the model looks fine.

It is found downstream. The estimator asks why the takeoff is empty, the reviewer cannot filter by system, and the coordinator opens a federated model with levels missing. By then the export has been sent, and the fix is another round trip with the modeler.

01 / Export

Export the model from the open Revit session

With the Nomic add-in connected in Revit 2022 to 2027 on Windows, ask Nomic to export the model to IFC from the Nomic pane in Revit. Nomic works in the model open in Revit, so the export comes from the same state your team is looking at, not from a copy somebody saved last week.

  • IFC exported from the model open in Revit
  • Requested in plain language from the Nomic pane
  • Same session as sheets, tags, and warnings
02 / Check

Read the IFC the way the recipient will

Nomic reads an IFC into tables of elements, properties, levels, spaces, materials, and relationships, then runs checks over the property data. Doors without fire ratings, spaces without area, and elements with no level come back as a list, so the export gets fixed in Revit before it is sent.

  • IFC2x3, IFC4, and IFC4x3 files read by the Nomic agent
  • Checks over element and property data
  • Gaps listed so they are fixed in the model, not downstream
03 / Use

Then ask the model what you need to know

Once the IFC is in Nomic, the whole team can ask it questions in the browser with nothing installed: door counts by level, room schedules, quantities by material, or which ducts cross a rated wall. The same file feeds quantity takeoff, room schedules, and model checks, each answered with real numbers from the model data.

  • Questions answered from the model data, with element citations
  • Quantity takeoff, room schedules, and material schedules
  • No Revit license needed to ask

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • Fire ratings, areas, levels, and system names in the IFC
  • Element and property tables read from the file
  • Counts against the model your team has open

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Yes, through the Nomic add-in for Revit. The add-in exports views and sheets to PDF and the model to IFC, working in the model open in Revit 2022 to 2027 on Windows.

No. Nomic can read IFC exports of a Revit model in the browser with nothing installed, for questions, checks, and quantities. Making changes in the Revit model needs the add-in.

IFC2x3, IFC4, and IFC4x3, including infrastructure and alignment entities. Upload a .ifc or .ifczip file and the Nomic agent indexes it automatically.

The export setup decides which IFC version, property sets, and base quantities leave Revit, and a property that was never filled in on the model cannot appear in the file. Nomic checks the IFC and lists the gaps so they can be fixed at the source.

The Revit add-in is part of the Enterprise plan and is in enterprise preview. Your Nomic account team provides the installer and turns it on for your organization.
Revit to IFC with AI: Export, Check, and Query | Nomic