AI drafting for evacuation plans

AI Fire Evacuation Plan Drafting from Floor Plans

An evacuation plan is the drawing a building occupant actually reads, posted by the door, often in a hurry. It has to show the exits that exist today, from the spot where the sign hangs, with the equipment where it really is. Nomic drafts evacuation plans from your floor plans in CAD: one plan per posting location, each oriented to the reader, with exit routes, fire equipment, and assembly points placed from the life safety plan and the fire alarm drawings.

Last reviewed: November 2026

You send

  • Floor plans as DWG or PDF
  • The life safety plan and fire alarm drawings, if you have them
  • Posting locations marked on a plan or listed by room
  • The assembly point and any owner emergency plan

Nomic hands back

  • An evacuation plan for each posting location as DWG
  • Print ready PDFs sized for the frames you post them in
  • A list of equipment with no confirmed location
  • A legend sheet in the symbol set you chose
1234567ABCOPEN OFFICE401OFFICE402OFFICE403OFFICE404OFFICE405OFFICE406OFFICE407OFFICE408CONFERENCE409CONFERENCE410CONFERENCE411OPEN OFFICE412STAIRS2TRAVEL 148'-0" < 250'-0"OL 24OL 6OL 6OL 12OL 6OL 6OL 6EXITFEC1-HOUR FIRE BARRIEREXIT ACCESS TRAVEL PATH27'-3"27'-0"27'-3"27'-3"27'-0"27'-3"94'-8"1ALIFE SAFETY PLANSCALE: 1/8" = 1'-0"N1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTHARBOR POINT OFFICESSCALE1/8" = 1'-0"DATE01/27/2026KEY PLANSHEET TITLELIFE SAFETY PLANSHEET NUMBERG-101

On the sheet

Life Safety Plan, annotated

A life safety plan with rated walls, occupant loads, and the exit access path checked against the travel limit.

  1. 1Rated corridor walls
  2. 2Exit access path with travel distance
  3. 3Exit sign at the stair
  4. 4Occupant load per room

The problem

One floor needs several plans, each from a different spot

A posted evacuation plan is not the life safety plan. It is simplified for someone who has never seen a drawing, rotated so up on the page is the way the reader faces, marked with where the reader stands, and drawn with symbols they will recognize. A floor with six posting locations needs six versions of the same plan, and each one has to change when a door is relocated, a stair is renumbered, or an extinguisher cabinet moves.

They are often drafted last, by whoever is free, from an old PDF of the floor plan. The common failures are a route through a door that is now locked or removed, a you are here marker in the wrong corridor, a missing second route, an assembly point that moved, or a symbol set that does not match the signs on the walls.

01 / Draft

Drafted from the floor plans, one per posting location

Nomic simplifies the floor plan to the walls, doors, stairs, and room names an occupant needs, then draws one plan for each posting location you mark. Each plan is rotated to the reader, shows a you are here marker, and draws the primary and secondary routes to the exits from that spot.

  • A plan per posting location, oriented to the reader
  • Primary and secondary routes drawn to separate exits
  • Room names and stair numbers matched to the building signage
02 / Equipment

Fire equipment placed where it really is

Extinguishers, manual pull stations, fire hose cabinets, AEDs, and areas of refuge are placed from the life safety plan and the fire alarm drawings, or from a walkthrough list your facilities team gives you. Nomic lists every item it could not locate on the drawings so someone checks it on site.

  • Extinguishers and pull stations placed from the source drawings
  • Areas of refuge and accessible routes marked
  • Equipment with no confirmed location listed for a site check
03 / Check

Checked against the code and the sign standard you use

Nomic checks each plan against the fire code and the sign standard you name: two routes where two exits are required, routes that pass only through doors that open, a legend and you are here marker on every plan, and symbols from ISO 7010 or NFPA 170. The building owner and the fire official keep the final word on the posted plans.

  • Every route checked to end at an exit on the life safety plan
  • Symbols drawn to ISO 7010 or NFPA 170, as you choose
  • Legend, north arrow, date, and you are here marker on every plan

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • IFC Section 404 fire safety, evacuation, and lockdown plans
  • NFPA 101 Life Safety Code means of egress
  • OSHA 29 CFR 1910.38 emergency action plans
  • ISO 23601 escape and evacuation plan signs
  • ISO 7010 or NFPA 170 safety symbols

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Yes. Nomic simplifies your floor plan, draws a plan for each posting location oriented to the reader, and marks exit routes, fire equipment, and the assembly point. Each plan comes back as a DWG and a print ready PDF.

A life safety plan is a permit drawing for the plans examiner: occupant loads, travel distances, exit capacity, and rated walls. An evacuation plan is posted in the building for occupants: where you are, the way out, and where the fire equipment is. Nomic drafts both, and uses the life safety plan as the source for the evacuation routes.

The set you name. Nomic draws ISO 7010 safety signs to the layout in ISO 23601, or NFPA 170 symbols, and adds a legend to every plan. If your building already has a symbol set on its signs, attach a sample and Nomic matches it.

The building owner or facility manager, and the fire official where your jurisdiction reviews them. Nomic drafts and checks the plans and lists anything it could not confirm from the drawings, such as an extinguisher location that needs a site check.

Both. With the Nomic add-ins for AutoCAD and Revit, the Nomic agent works in the drawing or model your team has open, with your approval before each change. Nomic can also draft on its own computer and save DWG files that open in AutoCAD or any DWG editor.
AI Fire Evacuation Plans: Exit Route Maps from CAD | Nomic