AU AS/NZS 3500.0
Plumbing and Drainage — Glossary of Terms
Last updated: October 2026
Short answer
Yes. Nomic agents check drawings against the 2021 edition of AU AS/NZS 3500.0 and cite the AU AS/NZS 3500.0 section behind each finding, so a licensed reviewer can confirm or dismiss each one. AU AS/NZS 3500.0 is adopted by 1 jurisdictions in Nomic's code data.
Review Drawings Against AU AS/NZS 3500.0 with Nomic Agents
Nomic agents flag likely AU AS/NZS 3500.0 issues on your drawings and cite the section behind each one, so your reviewer can confirm each finding with less manual lookup.
Ask in Plain English
"Does this egress path meet AU AS/NZS 3500.0 requirements?" Get a cited answer your team can check against the drawings.
Cited Answers
Every answer includes specific AU AS/NZS 3500.0 section numbers and code text. Full traceability.
Less Manual Lookup
Check drawings against AU AS/NZS 3500.0 with less time spent digging through PDFs and code books.
Jurisdictions
Latest Edition
Supported Editions
Total Editions
AU AS/NZS 3500.0 Edition Coverage
Nomic supports 1 editions of AU AS/NZS 3500.0, highlighted in green below.
What Reviewers Check Against AU AS/NZS 3500.0
Typical plumbing code items a reviewer looks for on a drawing set, and the sheets to include so a review can see them.
What gets checked
- Minimum plumbing fixture counts for the occupant load
- Pipe sizing for water supply and drainage
- Venting, cleanouts, and backflow prevention
- Water heater and fixture requirements
- Accessible fixture locations and clearances
Sheets to include
- Plumbing floor plans
- Riser diagrams
- Fixture and equipment schedules
- Fixture count calculation
Check your drawings against AU AS/NZS 3500.0
Upload your drawings to Nomic and ask questions about AU AS/NZS 3500.0 compliance. Every answer cites the specific code section.
Plumbing and Drainage — Glossary of Terms is part of the plumbing code framework, adopted by 1 jurisdictions across the United States. Nomic provides full AI-powered compliance support for AU AS/NZS 3500.0, enabling instant checks against your construction drawings with cited answers.
How Nomic Agents Review Against AU AS/NZS 3500.0
With the Nomic agent, you can upload any construction drawing and ask natural language questions about AU AS/NZS 3500.0 compliance. Our AI analyzes your drawings against the applicable code requirements and returns:
Specific Code Citations
Section numbers from AU AS/NZS 3500.0 with exact references.
Clear Explanations
Requirements explained and how they apply to your design.
Actionable Recommendations
Practical steps for achieving compliance.
Related References
Links to related code sections and amendments.
Less time digging through PDFs or standards manuals, with cited answers your team can verify and compliance issues caught before the set is issued.
AU AS/NZS 3500.0 and Plumbing Code
AU AS/NZS 3500.0 is one of 35 codes in the Plumbing Code category supported by Nomic.
Plumbing codes govern the design and installation of plumbing systems, including water supply and drainage.
More Plumbing Code Standards
View allASME B16.22
SupportedASME B16 22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings
ASME B16.18
SupportedASME B16 18 Cast Copper Alloy Solder Joint Pressure Fittings
IPC
SupportedInternational Plumbing Code IPC
AWS A5.8M/A5.8
SupportedAWS A5 8M A5 8 Specification For Filler Metals For Brazing And Braze Welding
UPC
SupportedUniform Plumbing Code
IPSDC
SupportedInternational Private Sewage Disposal Code IPSDC
Codes Often Reviewed with AU AS/NZS 3500.0
IBC
SupportedInternational Building Code IBC
IMC
SupportedInternational Mechanical Code IMC
IFGC
SupportedInternational Fuel Gas Code IFGC
A117.1
SupportedIcc A117.1 Accessible And Usable Buildings And Facilities