ASME B16.22
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
Last updated: October 2026
Short answer
Yes. Nomic agents check drawings against the 2018 and 2013 editions of ASME B16.22 and cite the ASME B16.22 section behind each finding, so a licensed reviewer can confirm or dismiss each one. ASME B16.22 is adopted by 63 jurisdictions in Nomic's code data.
Review Drawings Against ASME B16.22 with Nomic Agents
Nomic agents flag likely ASME B16.22 issues on your drawings and cite the section behind each one, so your reviewer can confirm each finding with less manual lookup.
Ask in Plain English
"Does this egress path meet ASME B16.22 requirements?" Get a cited answer your team can check against the drawings.
Cited Answers
Every answer includes specific ASME B16.22 section numbers and code text. Full traceability.
Less Manual Lookup
Check drawings against ASME B16.22 with less time spent digging through PDFs and code books.
Jurisdictions
Latest Edition
Supported Editions
Total Editions
ASME B16.22 Edition Coverage
Nomic supports 2 editions of ASME B16.22, highlighted in green below.
What Reviewers Check Against ASME B16.22
Typical plumbing code items a reviewer looks for on a drawing set, and the sheets to include so a review can see them.
What gets checked
- Minimum plumbing fixture counts for the occupant load
- Pipe sizing for water supply and drainage
- Venting, cleanouts, and backflow prevention
- Water heater and fixture requirements
- Accessible fixture locations and clearances
Sheets to include
- Plumbing floor plans
- Riser diagrams
- Fixture and equipment schedules
- Fixture count calculation
Check your drawings against ASME B16.22
Upload your drawings to Nomic and ask questions about ASME B16.22 compliance. Every answer cites the specific code section.
ASME B16 22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings is part of the plumbing code framework, adopted by 63 jurisdictions across the United States. Nomic provides full AI-powered compliance support for ASME B16.22, enabling instant checks against your construction drawings with cited answers.
How Nomic Agents Review Against ASME B16.22
With the Nomic agent, you can upload any construction drawing and ask natural language questions about ASME B16.22 compliance. Our AI analyzes your drawings against the applicable code requirements and returns:
Specific Code Citations
Section numbers from ASME B16.22 with exact references.
Clear Explanations
Requirements explained and how they apply to your design.
Actionable Recommendations
Practical steps for achieving compliance.
Related References
Links to related code sections and amendments.
Less time digging through PDFs or standards manuals, with cited answers your team can verify and compliance issues caught before the set is issued.
ASME B16.22 and Plumbing Code
ASME B16.22 is one of 35 codes in the Plumbing Code category supported by Nomic.
Plumbing codes govern the design and installation of plumbing systems, including water supply and drainage.
More Plumbing Code Standards
View allASME B16.18
SupportedASME B16 18 Cast Copper Alloy Solder Joint Pressure Fittings
IPC
SupportedInternational Plumbing Code IPC
AWS A5.8M/A5.8
SupportedAWS A5 8M A5 8 Specification For Filler Metals For Brazing And Braze Welding
UPC
SupportedUniform Plumbing Code
IPSDC
SupportedInternational Private Sewage Disposal Code IPSDC
AUSTRALIA NCC 2022 VOLUME THREE
SupportedNational Construction Code 2022 Volume Three — Plumbing Code of Australia
Codes Often Reviewed with ASME B16.22
IBC
SupportedInternational Building Code IBC
IMC
SupportedInternational Mechanical Code IMC
IFGC
SupportedInternational Fuel Gas Code IFGC
A117.1
SupportedIcc A117.1 Accessible And Usable Buildings And Facilities