Revit sheet setup with AI

Revit Sheet Setup Automation: Sheets, Viewports, and Title Blocks

A set of sheets in Revit is a long list of small decisions: one sheet per enlarged plan, a number that fits the series, the right title block, a viewport on the grid, a scale that matches the note. Nomic does that setup in the open model with the add-in, in your numbering and title block, and looks at every sheet it makes before your team reviews the set.

Last reviewed: November 2026

You send

  • The Revit model open with the Nomic add-in connected
  • The views or levels the sheets should cover
  • Your sheet numbering and title block
  • A sheet in the project to match for viewport position

Nomic hands back

  • New sheets with names, numbers, and title blocks
  • Viewports placed at scale and lined up across the series
  • An image-checked result for each sheet
  • A list of open items, such as views with no template
TALL STORAGE2'-10" MAX AFFT-1PL-2P-1CEILING 9'-0" AFF1AINTERIOR ELEVATIONSCALE: 1/2" = 1'-0"1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTHARBOR POINT OFFICESSCALE1/2" = 1'-0"DATE02/27/2026KEY PLANSHEET TITLEINTERIORELEVATIONSHEET NUMBERA-401

On the sheet

Interior Elevation, annotated

An interior elevation with casework, mounting heights, and finish tags keyed to the finish legend.

  1. 1Base cabinets with drawers and doors
  2. 2Countertop height dimension
  3. 3Upper cabinets and tall storage
  4. 4Finish tags keyed to the finish legend

The problem

Sheet setup is hours of clicking that nobody reviews

Setting up sheets is mechanical, and it takes real hours. Create the sheet, pick the title block, type the number and name, drag the view on, nudge it until it sits on the same spot as the sheet above it, set the scale. For a dozen enlarged toilet room plans, that is an afternoon of work the engineer would rather spend on the design.

Because it is mechanical, errors slip in and stay: a viewport a few inches off its neighbor, a number that skips the series, a title that does not match the view name. They are found when someone prints the set and flips through it.

01 / Create

One sheet per view, in your numbering and title block

Ask for the sheets you need in plain language, for example a sheet for each enlarged toilet room plan on Level 2. Nomic reads the views, levels, and loaded title blocks in the open model, then creates the sheets with your numbering, so the series follows the one the project already uses.

  • Sheets created from the views you name
  • Numbering and names that follow your series
  • Title block taken from the sheets already in the project
02 / Place

Viewports placed and lined up

Nomic places each view on its sheet at the project scale and lines viewports up with the others in the series, so plans sit in the same spot from sheet to sheet. Each approved change is a single Revit transaction, so one undo reverses it.

  • Viewports placed at the scale the view calls for
  • Positions matched across sheets in a series
  • Each change approved by you, undoable in one step
03 / Check

Every sheet looked at before it is reported

After each change, Nomic captures an image of the affected sheet and looks at it. A viewport overlapping a title or an element off its centerline is corrected and checked again before Nomic reports back. What it cannot settle, such as a view with no template, comes back as an open item.

  • An image of each sheet captured after the change
  • Overlaps and misaligned viewports corrected
  • Open items listed for the sheet owner

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • The open model, read before each change
  • Your sheet numbering and loaded title blocks
  • Existing sheets as the position reference
  • An image of the affected sheet after each change

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

Yes, with the Nomic add-in for Revit. Nomic creates sheets from the views you name, in your numbering and title block, places the viewports, and checks each sheet before it reports back.

Yes. Nothing in the model changes until you approve it, and each approved change is a single Revit transaction you can undo.

Nomic reads the sheets already in the project and follows that series. If the numbering rule is not clear from the model, say so in the request or Nomic asks.

Revit 2022 through 2027 on Windows. The add-in is installed on each computer that uses it.

The Revit add-in is part of the Enterprise plan and is in enterprise preview. Your Nomic account team provides the installer and turns it on for your organization.
Revit Sheet Setup Automation with AI | Nomic