What schedules can Nomic build?
Equipment, connection, panel, fixture, door, and finish schedules are common examples. Nomic builds them from cutsheets, specs, drawings, or models.
Nomic builds equipment and connection schedules from the equipment list and cutsheets, draws them on the sheet, and flags where your plans disagree with the manufacturer.
Task Nomic with anything...
Illustrative project, sped up. Click any file to open it.
Hundreds of rows come straight from the cutsheets.
Mismatches are caught on paper, not when the equipment arrives.
The spreadsheet and the drawn schedule always match.
Schedules are typed by hand from cutsheets, one row at a time. A wrong voltage or water size slips through, and nobody finds it until the equipment shows up on site.
Nomic reads every cutsheet, builds the schedule in Excel, circuits the loads, and draws the schedule on your sheet. Then it compares the schedule with your plans and flags every mismatch.
| Item | Volts / Ph | Source |
|---|---|---|
| K-12 Fryer | 208 / 3 | Item 12 |
| K-14 Combi oven | 208 / 3 | Item 14 |
| K-17 Dish machine | 208 / 3 | Item 17 |
| K-22 Ice machine | 120 / 1 | Item 22 |
Voltage, phase, load, and water connections are read from the manufacturer data for every item.
46 items scheduled Equipment list
38 circuits on panel KP-1 E-601
K-14 corrected to 208V three-phase Cutsheet p.41
The schedule is drawn on your sheet in house text styles, with item tags and keyed notes.
Where do the plans disagree with the cutsheets?
Nomic compares the schedule with the power and plumbing plans and flags every mismatch before it reaches the field.
Answers to common questions about this workflow.
Equipment, connection, panel, fixture, door, and finish schedules are common examples. Nomic builds them from cutsheets, specs, drawings, or models.
An Excel workbook and the schedule drawn on a DWG sheet, so the two stay in sync.