Firm guide

Reviews and drafting at Building Technology Associates, with Nomic

For architects, designers, and engineers at Building Technology Associates looking at Nomic. This guide ties the services and project types Building Technology Associates lists on its own website to what Nomic produces: cited first-pass reviews and drafted sheets that a practitioner checks before anything is issued.

Last reviewed 2026-11-21. Not affiliated with Building Technology Associates.

Specification review, first pass

Illustrative wall assembly

Outcomes

What reviews and drafting look like for Building Technology Associates teams

Each outcome below is tied to a service or project type Building Technology Associates lists publicly. Nomic does the first pass or the first draft, and the practitioner who owns the drawings, specifications, or submittals checks the result and makes the final call.

  1. Specification review01

    Drawing and specification conflicts surface before a set goes out

    BTA lists Roof Designs as a service and says it acts as the designer to specify the correct roof system for each situation. Nomic answers questions about a roofing specification section with the page cited, maps what an addendum changed, and flags places where the roof plan and the specification disagree.

    How specification review works
  2. Submittal review02

    Each submittal reaches the reviewer with a first pass drafted

    Under Construction Roofing Management, BTA describes acting for the owner so the job is done to specifications. Nomic cross-references a roofing contractor’s shop drawings and product data against the project specifications and drawings, then drafts a first-pass review and a starting submittal log for the reviewer to check.

    How submittal review works
  3. Drafting03

    Redlines and routine drafting come back as DWGs on the firm’s standards

    Roof replacement designs usually carry a roof plan and a set of edge, curb, and drain details. Nomic takes a drafting request in a sentence, such as a plan sheet or a round of redlines on those details, and saves DWGs on the layers and title blocks a team sets up, clouded for the team to check.

    How drafting works
See it run

The same reviews and drafting, played on an illustrative project

These sessions use made-up projects, not Building Technology Associates files. Each one runs from the request to the result a practitioner checks, with the sheets and pages it relied on cited.

Brightwater Transit Center/New Session

Hey Jordan, what are we building today?
Brightwater 100% CD Project Manual.pdfBrightwater Addendum 3 Project Manual.pdf

Task Nomic with anything...

Auto
Learn more
  1. AskPoint at two versions
  2. WorkBoth versions, every page
  3. DeliverTriaged, not a raw diff
  4. CheckCarried through or not

Illustrative project, sped up. Click any file to open it.

Public information

What Building Technology Associates says about its practice

Building Technology Associates describes itself as an independent, third-party roof management service provider that acts as the owner’s advocate for roof assets, from evaluation and design through construction management.
Source: btaworldwide.com/services
Headquarters
Farmington Hills, MI
btaworldwide.com/contact
Services
Roof Consulting, Roof Evaluations, Infrared Drone Assessments, Roof Designs, Construction Roofing Management, Roof Program Management
btaworldwide.com/services
For the evaluation

Security and access, for the team running the evaluation

Read the security details

Files stay where they are

Nomic connects to the systems that already hold project files, such as SharePoint, Egnyte, Autodesk Forma, and Procore, and enforces the permissions set there.

No training on project files

Nomic has zero-data-retention agreements with its AI providers. Project content is processed for inference, discarded, and never used to train their models.

SOC 2 Type II and SSO

Nomic is SOC 2 Type II certified and pen-tested annually. A firm can set up single sign-on through its identity provider with SAML or OIDC.

Hosting by region

Each firm gets its own Nomic-managed environment on AWS, hosted in the EU, Australia, the US, or the UK.

A practitioner at Building Technology Associates can start for free on their own project files. A team that wants to try Nomic across a project can book a demo to plan a pilot.

Questions

Questions and answers

No. Nomic wrote this page from information Building Technology Associates publishes on its own website, and each fact links to its source. Building Technology Associates has not reviewed or endorsed this page. To ask for a correction or for the page to be removed, email support@nomic.ai.

Based on the services and project types Building Technology Associates lists publicly, the closest outcomes are these: drawing and specification conflicts surface before a set goes out, each submittal reaches the reviewer with a first pass drafted, and redlines and routine drafting come back as DWGs on the firm’s standards. Every review is a first pass, and the practitioner who owns the drawings makes the final call. A team can try Nomic on its own project files.

No. Nomic has zero-data-retention agreements with Anthropic, OpenAI, and Google Cloud Vertex AI. Project content is processed for inference and discarded, and it is never used to train their models.

Nomic does not keep a separate permission system. Nomic enforces the access controls already set in the systems that hold the files, such as SharePoint, Egnyte, Autodesk Forma, and Procore. If a practitioner cannot open a folder there, that practitioner cannot see it in Nomic.

A practitioner can start for free at app.nomic.ai and run Nomic on their own project files. A team that wants to try Nomic across a project or a studio can book a demo with Nomic to plan a pilot.

A Guide for Building Technology Associates Teams Evaluating Nomic