CAD to PDF with AI

CAD to PDF with AI: Plotted, Checked, and Ready to Issue

The PDF is what the reviewer, the contractor, and the building department actually open, and it is usually the last thing anyone checks. Nomic plots every DWG it drafts or revises to a vector PDF and checks the plot against the drawing before it reports back, so the file you issue matches the drawing your team reviewed.

Last reviewed: November 2026

You send

  • The drawing to draft or revise
  • Your title block and plot standards
  • Review comments or markups, if the drawing answers them
  • The sheets that make up the issue package

Nomic hands back

  • A vector PDF plotted from each drawing
  • The DWG, saved as a new version with the original kept
  • A note of anything the plot check flagged
  • Response letters and schedules when the request asks for them
8" CONC. WALL W/ #5 @ 12" O.C. E.F.2" RIGID INSULATION, FULL HEIGHT5" SLAB ON GRADE OVER VAPOR RETARDER24" x 12" CONT. FOOTING W/ (3) #5 CONT.FINISH GRADE1AFOUNDATION WALL SECTIONSCALE: 3/4" = 1'-0"1234CONSULTING ENGINEERSREVISIONS1ISSUED FOR REVIEWPROJECTCEDAR LOFTSSCALE3/4" = 1'-0"DATE09/06/2026KEY PLANSHEET TITLEFOUNDATION WALLSECTIONSHEET NUMBERS-501

On the sheet

Foundation Wall Section, annotated

A wall section detail with the footing, reinforcing, insulation, and slab, each called out by a leader note.

  1. 1Footing with reinforcing bars
  2. 2Continuous rigid insulation
  3. 3Slab on grade bearing on the wall
  4. 4Leader notes calling out each material

The problem

The plot is where a good drawing goes wrong

A DWG can be right and its PDF can still be wrong. An xref that did not load leaves a sheet with no background. A layer that was frozen for drafting drops a system off the plot. A viewport at the wrong scale prints a plan that no longer matches the scale note in the title block. Fonts get substituted, a plot style turns every lineweight to hairline, and the sheet goes out looking unfinished.

These get caught late because plotting feels mechanical. Somebody batch plots at the end of the day, skims thumbnails, and sends the set. The first person to read each sheet closely is the reviewer on the other side.

01 / Plot

Every drawing Nomic drafts is plotted by Nomic

When Nomic drafts or revises a drawing, the request does not end at the DWG. Nomic saves the file, reopens it, audits it, and plots it to a vector PDF, so text stays text and linework stays sharp at any zoom. The DWG and the PDF come back together.

  • Saved, reopened, and audited before plotting
  • Vector PDF, not a raster image of the sheet
  • DWG and PDF returned together from the same request
02 / Check

The plot is checked before you see it

Nomic looks at the plotted PDF and compares it with the drawing, so a sheet that lost its background, dropped a layer, or printed at the wrong scale is fixed or flagged before the request is marked done. Anything Nomic cannot settle by itself comes back as a note for the person who owns the sheet.

  • Plot compared with the drawing, sheet by sheet
  • Problems fixed in the DWG and plotted again
  • Open items listed for the sheet owner
03 / Issue

A set where every sheet has its PDF

For a set, Nomic returns each revised DWG as a new version, with the original kept, next to its plotted PDF, plus any response letter or schedule the request called for. Your team reviews the changes, the engineer or architect of record makes the final call, and the set goes out.

  • A new version of every revised DWG, originals preserved
  • A plotted PDF beside each drawing
  • Response letters and schedules alongside the set

Checked against

The code and documents behind every sheet

Name the editions the project is designed to and Nomic checks its own drawing against them before handing it back. Your engineer or architect of record makes the final call and stamps the set.

  • The saved DWG, reopened and audited
  • The plotted PDF against the drawing
  • Your title block and sheet standards
  • Sheet numbers and titles across the set

How it works

From a sentence to a stamped set

  1. Step 1

    Ask for the drawing

    Say what the sheet needs to show and attach the backgrounds, markups, cutsheets, or photos. A sentence is enough to start.

  2. Step 2

    Nomic drafts it in CAD

    Nomic works in CAD on its own computer and saves real DWG files to the project, or in your open AutoCAD drawing or Revit model through its add-ins. Either way it uses your layers and blocks and follows how your firm drew the same thing before.

  3. Step 3

    Nomic checks its own work

    The drawing is checked against the code editions you name and the source documents. Everything Nomic drew is clouded, and open questions are listed.

  4. Step 4

    Your team reviews and stamps

    Your engineers and architects review the clouded changes, make the final call, and issue the set under their own stamp.

FAQ

Frequently asked questions

A plain conversion of a DWG nobody changed is a plot or publish in your CAD software, and Nomic does not replace that. When Nomic drafts or revises a drawing, it plots the PDF itself and checks the plot before it reports back.

Nomic returns a vector PDF, so text and linework stay sharp when you zoom in on a sheet.

Missing xrefs, frozen or off layers, a viewport at the wrong scale, substituted fonts, and plot styles that change lineweights. Each leaves a sheet that looks different from the drawing someone reviewed.

Yes. Nomic returns both. A revision of a file you attached is saved as a new version of that file, and the original is preserved.

No. Check every drawing before issue. Your team reviews what Nomic drew and plotted, and the engineer or architect of record makes the final call.
CAD to PDF with AI: DWG Plots That Are Checked | Nomic